Hot brake abrasion that burns into the surface of car parts causes flash rust to form on the vehicle parts. This deteriorates the value and appearance of your vehicle. Rust pitting can also occur.

With the A1 Flash Rust Remover from Dr. Wack, these problems are a thing of the past! It quickly and thoroughly removes the rust film and makes your vehicle shine again.

Application areas

The A1 Flash Rust Remover is suitable for all surfaces such as paint, plastic or metal. 

Check for compatibility beforehand on bare aluminium.  

Product Advantages

- eliminates flash rust, the first signs of corrosion and industrial dust 

- acid-free – will not damage materials 

- with gel formula – does not drip off, optimal penetration 

- the effect indicator lets you know when to rinse off

Application

A bottle Dr. Wack A1 Flash Rust Remover contains 500 ml.  

1. Spray the A1 Flash Rust Remover onto a cleaned surface, leave for five minutes, then wipe clean with a wet sponge.

2. Rinse surface thoroughly with water and wipe with a chamois cloth.

After use, we recommend that you seal painted surfaces.  

Do not use in direct sunlight or on heated surfaces. Store in a frost-protected space.

Download safety data sheet Dr. Wack A1 Flash Rust Remover