Again and again, the exterior appearance of the vehicle is destroyed by ugly scratches. Even if you are very mindful and careful with the vehicle, new scratches keep appearing. Until now, it was always expensive and time-consuming to restore the exterior appearance of your vehicle. But this is now a thing of the past!

With the A1 Nano Scratch Polish from Dr. Wack you say the fight to the scratches. It easily removes the scratches from your paint and gives your vehicle a scratch-free exterior again. 

Application Area

The A1 Nano Scratch Polish is suitable for car wash scratches, fine scratches from shrubbery, scratches in door knob cavities, painted plastic shock absorbers, etc., fine scratches in hard transparent plastic glass, like e.g. headlights, blinkers, etc.

Deeper scratches that reach as far as the primer can of course be improved using A1 Nano Scratch Polish, but cannot be removed entirely. These scratches can only be removed by a professional paintwork repair. You can find out for yourself whether a scratch is too deep using the fingernail test. If you can catch the edge of the paint scratch with your fingernail, then it is usually already too deep

Product advantages

- removes fine scratches instead of only covering the latter 

- removes fine scratches without producing new fine scratches through the polishing process

- easy and quick application: only one operating step

- creates a highly brilliant surface and colour depth 

- silicon-free 

- also suited for nano and / or more scratch-resistant lacquers

- suitable for polishing machines

Application

The A1 Nano Scratch Polish by Dr. Wack contains 50 ml.

1.Before polishing, ensure that the surface is clean and dry.

2. Shake the tube well before use.

3. Lightly moisten the blue high-performance polishing cloth. If the cloth is too wet, this will reduce the polishing performance.

4. Place a little A1 Nano Scratch Polish onto the blue polishing cloth (around 1 cm dia.). Spread the polish onto the surface to be polished before polishing. Now polish it in for up to one minute using small, circular movements and plenty of pressure. To produce a good result, it is very important that you apply plenty of pressure as you polish. Always keep the blue polishing cloth sufficiently moist.

5. Redose if required. Then allow the polished areas to dry off fully and wipe off any polish residue using the white wiping cloth provided.

Repeat this procedure, if required. Treat larger surfaces in sections.

We recommend you to refrain from trying to remove such scratches yourself, e.g. by using sand paper because of the highly abrasive effect and the related risk of damages. Do not use on chromed plastic parts such as car emblems or on soft, unpainted plastic surfaces such as the dashboard, side panelling etc. Do not use in extreme direct sunlight or on hot lacquer. Store the tube in a frost-protected place. Ideal application temperature 20-25°C.

Download safety data sheet Dr. Wack Nano Scratch Polish